INTRODUCTION

Multi Blade Gang Saw Machine, is a new generation technology with reduced operational and maintenance cost. The design of this particular machine is a result of years of enterprise and research, to find a solution for higher production, cutting and sawing at reduced cost. This new innovation would not only provide owners, a cutting edge over their competitors, but also generate higher profits.

ARTICULATED RECTILINEAR ARMS

The main technical design, behind its high performance is the Four Articulated Rectilinear Arms, which support the Blade Rack Frame. These Arms are friction free during operation, unlike traditional slideways. Thus, resulting in a considerable reduction of maintenance cost and elimination of recurring lubricant cost. The enclosed cover, not only provides protection from dirt, dust, water and rust but also facilitates the operator to have a look on moving parts for any preventive maintenance, as well as greasing, while the machine is running. 

BATTERY UNIT

The power and source of movement to the Blade Rack Frame is provided by the Battery Unit, which consists of heavy duty ultra-sonic tested shaft. This shaft is mounted with a flywheel in the centre and two roller bearings on either sides. The Eccentrics are mounted on either ends of the main shaft, which in turn is connected to the Connecting Rods.

MODEL

MODEL	BlockSize (in mm L x W x H)	BlockSize (in ft L x W x H)
GS 80/20 Blades	3200 x 2100 x 2100	10.50 x 6.75 x 6.75
GS 70/20 Blades	3200 x 1850 x 2000	10.50 x 6.00 x 6.50
GS 60/20 Blades	2500 x 1525 x 1525	08.00 x 5.00 x 5.00
GS 50/20 Blades	2500 x 1300 x 1525	08.00 x 4.25 x 5.00

TECHNICAL SPECIFICATIONS

Technical Data	Unit	GS 80/20	GS 70/20	GS 60/20	GS 50/20
Useful Cutting Length (Block)	mm	3200	3200	2500	2500
Useful Cutting  Width (Block)	mm	2100	1800	1525	1300
Useful Cutting Height (Block)	mm	2100	2000	1525	1525
No. of Blades	nos.	80	70	60	50
Blade Length	mm	4300	4200	3350	3350
Blades Useful Stroke (Stroke Length)	mm	800	600	500	500
Lowering  Speed (Cut down feed speed)	mm/hr	50-500	50-500	75-700	75-700
Flywheel Revolutions	rpm	92	92	92	92
Main Motor Power	kw / hp	132 / 180	110 / 150	75 / 100	55 / 75
Fast Lowering Motor Power	kw / hp	11 / 15	7.5 / 10	3.7 / 5	3.7 / 5
Cut Down Feed Motor Power	kw / hp	2.2 / 3	2.2 / 3	1.5 / 2	1.5 / 2
Water Pump Motor Power	kw / hp	5.5 / 7.5 X 2*	5.5 / 7.5 X 2*	3.7 / 5.0 X 2	3.7 / 5.0
Trolley Translation Motor Power	kw / hp	1.5 / 2	1.5 / 2	1.1 / 1.5	1.1 / 1.5
Total Installed Power	kw / hp	160 / 215	132 / 180	88.7 / 118.5	65 / 88.5
Voltage (Upon Request)	Volts / Hz	415 or 380 / 50	415 or 380 / 50	415 or 380 / 50	415 or 380 / 50
Water Consumption	Ltrs / blade	10	10	8	8
Approximate Machine Weight	kgs	53000	42000	30000	25000
Machine Length	mm	13000 / 15000	11800 / 13800	11800	11800
Machine Width	mm	4800	4300	3920	3640
Machine Height	mm	5250	5000	4250	4250
Foundation Length	mm	13225 / 15225	12000 / 14000	10700 / 12150	10700 / 12150
Foundation Width	mm	5800	5600	4220	4200
Foundation Depth	mm	3450	3450	2150	2150