Go to Laxmi Group Home Page

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player


LAXMI TILE CHAMFERING GROOVING PLANT: MODEL: LTCGP (MARBLE)

Introduction

This plant is best suited for calibrating of sizes, Chamfering of all four edge & grooving on bottom surface off marble/granite tiles. This is a continuous type of plant consists of 5 tables made of fabricated M.S. sheet.

&raised by pneumatic cylinder. P.I.V. pulley’s have been provided on  driving arrangement of Moving Tiles.


Technical Specifications

Working width minimum 150 MM. Chamfering head motor 2 HP.
Working width maximum 600 MM. Grooving head motor 3 HP.
No. of calibrating heads 2 Nos. Buffer wheel motor  1 HP.
Maximum thickness of tile 30 MM. Turn Wheel 0.5 HP.
Chamfering heads  4 Nos. Water consumption 105 lpm
Grooving heads 1 Nos. Total power consumption 23 HP.
Blowers 0.5 HP. 2 Nos. Floor required Area 50 X 10 sq. ft.
Heaters 0.5 KW. 6 Nos. Water Consumption 250 Ltrs./ Min.
Buffer wheel 2 No. Calibrating head motor 2 HP.
Overall dimension: Length  6000 MM., Width - 5500 MM., Height - 4000 MM.

Complete machine with electric motors, Electrical, control panel, hydraulic system etc. but without Diamond tools & Pallets.

LAXMI POLISHING MACHINE 450 MM WIDTH: MODEL: LPM (10+3)

Introduction

The Tile Polishing machine is suitable for the mass production of polished tile with continuous process. The machine consists of sturdy steel frame on which perfectly finished C. I. Platform  is placed. The Tile first passes through calibration heads which calibrates the thickness of tile then these  automatically moves to several Polishing heads on same moving belt Conveyor. The Polishing is done by Individual Polishing heads placed on the line of moving belt Conveyor while tiles are in Motion.

The   Multi Stage Calibration & polishing on single machine ensures the perfect size and shining polish on tiles/tile strips. The belt movement can be varied to suit, type, hardness and size of tiles. Similarly each polishing head is provided with Pneumatic Cylinder by which Abrasives are pressed upon moving Tiles for Efficient Polishing. The pressure can also be relived/regulated depending upon type of material, type of surface and type of Polish desired. This Abrasive of Individual Polishing head can be Lifted or lowered while Other heads are working to every stages of polishing & make adjustment for maintenance of individual Polishing heads Separately. The Tiles after polishing at all the stages are automatically moves on Idler Rollers situated at other and for collection and further operation. The calibrating heads which maintain desired thickness of tiles can be lifted / lowered by hand wheels provided on each head. There is indicator of height of abrasive holder above moving belt conveyor.

Technical Specifications

Working Useful working width 450 MM
Abrasive head with 10 HP. 10 Nos.
Calibrating head 20 Hp. 3 Nos.
Drive motor 2 HP. 1 Nos.
Maximum thickness of tiles 50 MM.
Maximum belt speed 1500 MM./Min.(from 150 to 1500)
Maximum output 300 Sq. Ft. Per hour
Total power HP. 162 HP
Water Consumption 10 Ltr. Per Min.

Note : Air compressor shall be arranged by you. Further if you desire the same will be supplied by us at extra Cost. Power, water and pipe line for Air shall be arranged (at machine head ) by you.     

LAXMI TILE COLOR MACHINE: MODEL: LSM(TILE)

Introduction

The LAXMI TILE COLOR MACHINE is best suited on tile coloring. Laxmi tile color machine consists on belt conveyor having three motorized coloring head. Bridge movement on Rake pinion. Color head is operated by pneumatic pressure systems. Complete machine with Electricals control panel with following specification.


Technical Specifications

Belt Speed Variable  5 Mtr. To  5 Mtr. Per Min.
Color Head Motor     3 No. ( 2 HP. Each )
Max. Working Width 24”
Pneumatic Blower 1 HP.
Electrical Control Panel  
LAXMI TILE SHINER MACHINE : MODEL - LSM(TILE)

Introduction

LAXMI TILE SHINER MACHINE is best suited on tile Shining/polishing. Laxmi tile shiner Machine consists on belt conveyor having three motorized shining head. Bridge movement Shiner head by hydraulic cylinder, shiner head is operated by pneumatic pressure systems.Complete machine with Electricals control panel with following specification


Technical Specifications

Belt Speed Variable  5 Mtr. To  5 Mtr. Per Min.
Shiner Head Motor 3 No. ( 2 HP. Each )
Max. Working Width 650 MM.
Pneumatic Blower 1 HP.
Hy. Power Pack Motor 2 HP.
Electrical Control Panel  
LAXMI SLAB CALIBRATING MACHINE:MODEL : LCM (TILE STRIPS)

Introduction

LAXMI LAXMI TILE CALIBRATING MACHINE is suitable for the Mass production of calibrating slab with continuous process the machine consists of sturdy steel frame on which perfectly finished C.I. Platform is placed. The slab Strips are placed on end and rolled on to a continuously moving Belt Conveyor. The Slab first passes through calibrating heads for calibrates the thickness of slab.

The Calibrating Heads which Maintain Desired thickness of slab which can be Lifted Lowered by hand Wheels provided on each head. There is indicator of height of abrasive holder above belt conveyor. Complete machine with Electricals control panel with following specification :


Technical Specifications

Useful working width 1700 MM.
Calibrating head 25 HP. Motor 2 Nos.
Drive Motor 2 HP.     1 No.
Max. thickness of slab 50 MM.
Max. belt speed 1500 MM./Per Min.( Variable from 150 To 1500 )          
Max. output   300 Sq. Ft./hour
Total Power   52 HP.
Water Required 10 Ltrs./Min. Calibrating heads

EXCLUSION: Power, Water and pipe line for air shall be arrange (at machine head) by you.

LAXMI TILE CALIBRATING MACHINE :MODEL : LCM(700 MM WIDTH

Introduction

LAXMI TILE CALIBRATING MACHINE is suitable for the Mass production of calibrating tiles with continuous process the Machine consists of sturdy Steel Frame on which perfectly finished Platform is placed. The tile Strips are placed on end and rolled on to a continuously moving Belt Conveyor. The strips first passes through Abrasive heads for calibrates the thickness of Strip. The Calibrating Heads which Maintain desired thickness of strips which can be Lifted Lowered by hand wheels provided on each head. There is indicator of height of abrasive holder above belt conveyor. Complete machine with Electricals control panel with following specification :  


Technical Specifications

Useful working width 700 MM.
Calibrating head 20 HP. Motor 2 Nos.
Drive Motor 2 HP. 1 No.
Max. thickness of Strips 50 MM.
Max. belt speed 1500 MM./Per Min. (Variable from 150 To 1500)
Total Power 42 HP.
Water Required 10 Ltrs./Min. Calibrating heads
Max. Output 300 Sq. Ft. per Hr.

EXCLUSION: Power, Water and pipe line for air shall be arrange ( at machine head ) by you.

LAXMI TILE CHAMFERING GROOVING PLANT: MODEL: LTCGP (MARBLE)

Introduction

This plant is best suited for calibrating of sizes, Chamfering of all four edge & grooving on bottom surface off marble/granite tiles. This is a continuous type of plant consists of 5 tables made of fabricated M.S. sheet.

Operations like calibrating, chamfering, bottom grooving, drying, buffing are carried out at different table while tiles automatically moves from one table to other table on moving conveyor lines. All the Tables have Setting Arrangement to adjust size of Tiles. The chamfering heads are pneumatically lowered & raised by pneumatic cylinder. P. I. V. pulley’s have been provided on driving arrangement of Moving Tiles.


Technical Specifications

Working width minimum 150 MM. Calibrating head motor 2 HP.
Working with maximum 600 MM. Chamfering head motor 2 HP.
No. of calibrating heads 2 Nos. Grooving head motor 3 HP.
Maximum thickness of tile 30 MM. Buffer wheel motor  1 HP.
Chamfering heads 4 Nos. Turn Wheel 0.5 HP.
Grooving heads 1 Nos. Water consumption 105 lpm
Blowers 0.5 HP. 2 Nos. Total power consumption 23 HP.
Heaters 0.5 KW. 6 Nos. Floor required Area 50 X 10 sq. ft.
Buffer wheel 2 No.    

EXCLUSION: Power, Water and pipe line for air shall be arrange (at machine head) by you.